One step is the hobby of RC Helis toy version that comes with a control from 3 to 4 channels at a distance. They allow for virtually all types of flights with the exception of extreme stunts. The full functionality come with 6-channel models with remote control. This allows a full 3D helicopter movements that really push the boundaries of what the helicopter can.
A newcomer should be a real good host at a time. You can lock the controls on channel 4 / 6 remote control and make it a 2Channel, but you do not fly a beautiful 5-Channel Heli mode capable of 2 channels. It 's too dangerous for a more expensive aircraft. That is, if you want to know some bills in a beautiful helicopter to fly Walkera 6 channel to 2 channels and then to spend a 3-channel. So go ahead and take it all together. You have now pretty well in a corner that thanked me for while smash the $ 20 one in the wall. I'm not too easy to break, becauseare small and light. You could pause, if you're a little 'excited too, but not to worry. They are easily replaceable and inexpensive. Another great thing about 2 channel, 99% are ready to fly out of the box.
Rc Helicopter
Then, 2 - channel helicopters have only two controls, and these are the first that anyone has learned. These are the gas and rudder.
The accelerator is the control that sends power to the blades. You always want to smooth butterfly. Youdo not knock on 100% gas or lose control in a hurry. Practice slowly increasing throttle until you lift the helicopter to the table or floor light. See if you bounce it gently on the surface
The rudder comes into play, either directly to these machines a bit '. With a channel-2, total control, but it can still be fun. The rudder control is simply the rotation of the body with respect to the helicopter blades. In this way the balance helicopterfor the forward movement, or a radical change of direction.
Now start with a 2-channel to note that, the helicopter will fly in seemingly random directions. It is no coincidence at all, but very specific to the weight distribution of the helicopter and the angle of attack. In a 4-channel that you control the balance with the signs of more careful monitoring and weight management. On your test weights to 2 channels and have different positions, the right balance for the small helicopter to find. Experimentthis will be a good practice before taking off his car to 6 channels. With the right attitude and practice, you float in a position to be a good 2 channel to run at different altitudes. You can float in a reduction in and take a few inches from the ground, while the body instead of the tail rotor.
Now the only difference between 2 and 3 channels is the ability to transmit the command.
You can then direct the helicopter around the room andPlot to fly in certain areas and around obstacles. It just takes a little 'practice to achieve, but you may one day help to ensure that you can learn all the concepts learned in one to two channels.
A 4-channel you can easily go back. Some are larger and therefore easier to float, but out of the question.
Move is the 6-channel helicopter is a bit 'different. These are usually much larger and require outside to safety. The rotors spin very rapidly. The trade-off isrewarding because you can use these tricks are amazing and awe meet.
The sticks on a channel-6 is to move in different directions at once - like a video game controller with joystick. Then, you can learn the inverse floating loops, rolls and all 3D maneuvers. The only real way to learn this is really a mortgage or a lot of practical preparation and a good feel for the helicopter.
How to fly a RC helicopter - a brief lesson
No comments:
Post a Comment